Bostitch SL1838BC Cap Stapler

Bostitch SL1838BC Cap Stapler Reviews

Other Picture

Bostitch SL1838BC Cap Stapler Feature

• Internal air filter for maximum reliability
• Selectable trigger operation converts from sequential to contact operation
• Adjustable depth of drive sets staples to the desired depths quickly and conveniently
• Designed to be the preferred method of securing felt housewrap and thin foam to framing
• 20 percent lighter than the existing model

Save time and energy when you use the Bostitch SL1838BC 18-Gauge Cap Stapler to secure felt, house wrap, roofing paper, or thin foam into sidewall sheathing and roof sheathing. With the option to fire sequentially or on contact, the Bostitch SL1838BC is an easy-to-handle, lightweight tool that features tool-free depth adjustment, rear exhaust, and a convenient belt hook that frees up your hands for other tasks.

SL1838BC 18-Gauge Cap Stapler At a Glance: For securing felt, house wrap and thin foam into sidewall and roof sheathing Lightweight design with over-molded grip and convenient belt hook Rear exhaust prevents blowback in face of user Oversized foot compensates for uneven building surfaces and provides sequential/contact/off trigger selection Adjustable depth of drive lets you set staples to desired depths Includes carrying case, swivel air fitting, staples, and caps

Adjustable depth of drive sets staples to the desired depths quickly and conveniently. View larger.

Staples: 18ga, 5/16" crown, 1/2" - 1-1/2" long staples View larger.

Increased Surface Area and Precise Operation
The Bostitch SL1838BC makes it easy for you to correctly install felt, house wrap, foam board insulation, and more into sidewall and roof sheathing. A plastic cap increases the surface area of the fastener, so you can be confident that exposure to wind and weather won't harm your work. And thanks to the SL1838BC's precise operation, you won't have to worry about damage to the material during application.

Trigger Selection and Adjustable Depth of Drive
The SL1838BC features an oversized foot on the triggering system to help compensate for uneven building surfaces, as well as to provide a sequential/contact/off trigger selection. The stapler also features adjustable depth of drive, which lets you set staples to desired depths quickly and easily.

Designed for Comfort and Safety
At an easy-to-handle 3.9 pounds, the Bostitch SL1838BC can be used for long periods of time and in overhead positions with minimum operator fatigue. The overmolded rubber grip offers increased comfort for all-day projects, and the rear exhaust prevents blowback in your face. Additionally, a handy belt hook allows you to quickly store the tool out of the way, freeing up your hands for other work.

Tool Specifications
The Bostitch SL1838BC takes 18-gauge, 1/2-inch to 1-1/2 inch staples. A magazine capacity of 160 staples keeps you in operation for longer periods of time--and reloading is fast and easy. Additionally, a wide 5/16-inch crown helps prevent puncture to the cap.

The Bostitch SL1838BC is backed by a manufacturer's seven-year limited warranty.

What's in the Box
Bostitch SL1838BC 18-Gauge Cap Stapler, 1/4-inch swivel air fitting, durable carry case, 1,000 1-inch SL staples, and 1,000 Bostitch caps.

Includes 18 Gauge Cap Stapler - SL1838BC, 1/4-in Swivel Air Fitting, (1,000) 1-in SL Staples, (1,000) Bostitch Caps, Carrying Case

Visit Store Now !!

Detail Products

• Bostitch SBCAPS 1000 Caps for Cap Stapler and Nailer
• Bostitch SL50351G 1-by-5/16-Inch 18-Gauge Staples, 5000-Per Box

Detail Reviews

May 29, 2011 08:37:05

Grip-Rite GRC58A Cap Stapler Gen 2, 5/8-Inch

Grip-Rite GRC58A Cap Stapler Gen 2, 5/8-Inch Reviews

Other Picture

Grip-Rite GRC58A Cap Stapler Gen 2, 5/8-Inch Feature

• Fast, easy loading
• Tool never leaves your hands while re-loading
• Caps and Staples come packaged together
• Extremely lightweight at just 4 lbs.
• Belt clip included

Designed to be one of the lightest, smallest, and easiest to use plastic cap staplers on the market. At just 4 pounds, this cap stapler comes equipped with a smaller footprint than competitive staplers - and as is rugged and durable as the Grip-Rite fasteners youve come to depend on. Quick load - load stapes and caps in seconds rather than minutes. Tool never leaves your hand while re-loading. Belt clip included.

Visit Store Now !!

Detail Products

• Grip-Rite GRCP5822 5/8 Inch Staples and Caps for Grip-Rite GRC58 Cap Stapler (2,200 per Box)

Detail Reviews

May 28, 2011 10:39:04

Speedaire 3EVR1 Finish Nailer, 16 Gauge, 3/4-2 1/2 In

Speedaire 3EVR1 Finish Nailer, 16 Gauge, 3/4-2 1/2 In Reviews

Other Picture

Pneumatic Finish Nailer, Straight, Adhesive Collation Type, Fastener Range 3/4 to 2 1/2 In, 16 Gauge, Shank Dia 0.113 to 0.131 In, CFM per Shot 0.224, Required Pressure 70 to 100 PSI, Max Pressure 120 PSI, Magazine Capacity 110, Top Adjustable Exhaust, No Mar Tip, Aluminum Housing, Color Green, 1/4 In Male Plug, Adjustable Trigger, Length 10 13/16 In, Width 3 29/32 In, Height 11 45/64 In, Tool Weight 3.8 Lb, Features Adjustable Top Exhaust, For Use With 16 Gauge Nails

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 12:10:03

Grip-Rite GRTFN250 16 Gauge Finish Nailer, 2-1/2-Inch

Grip-Rite GRTFN250 16 Gauge Finish Nailer, 2-1/2-Inch Reviews

Other Picture

Grip-Rite GRTFN250 16 Gauge Finish Nailer, 2-1/2-Inch Feature

• Rotating belt hook
• Nail capacity - 110
• 360 Degrees tool-free air exhaust
• Tool-free depth adjustment
• No-mar pad protects work surface

GRTFN250 Finally the Grip-Rite fasteners you have used for years have a durable companion in this compact, lightweight finish nailer. The Grip-Rite GRTFN250 16-Gauge Finish Nailer is especially designed for baseboard, cabinet, chair rail, trim, molding, and finish work, and is tough and reliable, just like the Grip-Rite fasteners you have come to rely on. Features: -360 degree tool-free air exhaust -Tool-free depth adjustment -No-mar pad protects work surfaces -Nail capacity: 110 -Tool-free jam clearing -Fast, easy loading -Lightweight and compact -Includes: carrying case, safety glasses, hex wrenches, tool oil, and male coupler -Optional ''bump fire'' trigger kit -12-month limited warranty -Designed especially for baseboard, cabinet, chair rail, trim, molding, and finish work Specifications: -Firing mode: sequential -Magazine capacity: 110 -Operating pressure PSI: 70-110 -Fastener type: 16 gauge finish nails -Fastener range: 1'' to 2-1/2'' -Collation: adhesive -Weight: 3.9 pounds -Dimensions: 11'' H x 12.5'' L x 3'' W Specification Sheet: GRTFN250

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 15:23:04

AXXIS CN-565Z ZERO DEGREE COIL NAILER

AXXIS CN-565Z ZERO DEGREE COIL NAILER Reviews

Other Picture

AXXIS CN-565Z ZERO DEGREE COIL NAILER Feature

• Weight: 5.03 lbs
• Operating Pressure: 70-120 psi
• Drives 1-1/4" to 2-1/2" nails (.080 to .110)
• Zero Degree Coil Nailer
• Similar to Duo-Fast RCN 225/ADJ

Comes with Safety Glasses, Tool Oil, Allen Wrench, Owners Manual with parts diagram.

Visit Store Now !!

Detail Products

Detail Reviews

May 24, 2011 16:59:16

SEPTLS166770S - 770 Series Pistol Grip Blow Guns

SEPTLS166770S - 770 Series Pistol Grip Blow Guns Reviews

Other Picture

SEPTLS166770S - 770 Series Pistol Grip Blow Guns Feature

• Type - Standard Blow Gun
• Inlet Size - 1/4 in NPT(F)
• Wt. - 3/4 lb

Variable flow control for precise air delivery. Lightweight and ergonomic design reduces user fatigue. Brass reinforced inlet.

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 13:19:05

Clipped Head Framing Nailer

Clipped Head Framing Nailer Reviews

Other Picture

28 Angle 2 x 3-1/2 Clipped Head Framing Nailer

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 18:05:04

HIGH GRADE Cadex 23 gauge pins pin nails, 1-1/8" (28MM) - 10,000 PK

HIGH GRADE Cadex 23 gauge pins pin nails, 1-1/8" (28MM) - 10,000 PK Reviews

Other Picture

HIGH GRADE Cadex 23 gauge pins pin nails, 1-1/8" (28MM) - 10,000 PK Feature

• 1-1/8" (28MM) 23 Gauge pins 10,000 pk
• Rounded edges of pin result in less deflection than cheaper brands (pls. read description below).
• Well made product from Cadex, manufactuer of high grade finish nailers
• Fits all 23 gauge pinners rated for this length.

Cadex 23 gauge pins are considered the highest quality available, developed by the same company that markets the highly rated Cadex and Nikle 23 gauge tools. The slightly rounded edges result in less pin deflection in the wood than the cheaper square pins. If you are using 23 gauge in the first place, you are likely working on fine finishing or furniture. Yes, you can buy cheaper pins, but at a fraction of a penny a pin, why compromise on your project?

Cadex headless pins will fit all 23 gauge pinners including Cadex, Nikle, Bostitch, Senco, Porter Cable, Spot Nail, and others (within rated size specification of course).

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 14:07:04

Hitachi NV83A Full Head Construction Coil Nailer

Hitachi NV83A Full Head Construction Coil Nailer Reviews

Other Picture

Hitachi NV83A Full Head Construction Coil Nailer Feature

• Built-in toe nail push lever
• Depth-of-drive adjustment
• Open-nose design
• Plastic shield deflects wire collation
• Contact trip trigger

Some building codes require full-head nails. This Hitachi framing nailer supports full, round-head, coil-wire-collation nails from 2 to 3-1/4 inches. It's a well-balanced tool that feels good in the hand, and it weighs only 8 pounds, so user fatigue is less than it is with other heavier framing nailers. The handle is slim and ergonomic, and the rubber grip is a nice touch that enhances the tool's comfort level. The Hitachi has one of the more aggressive tips of any nailer, which means the tip features prominent spikes to grip material for toe-nailing. (There's a plastic no-mar tip cover available for finish applications.) The open nose makes cleaning simple jams easy, but for tough jams you'll need to undo a hex screw to release the magazine. Hitachi pneumatics are known for their reliability and relatively low maintenance requirements, and this nailer features the same simple and efficient components that have built Hitachi's stellar reputation. The bottom line? The Hitachi full-head nailer makes a user-friendly, dependable, and sturdy addition to any professional's tool arsenal. --Mark McDonald Tool-less depth of drive Shoots 2" to 3 1/4" x .099 to .131 diameter nails Quick driving, 2 valve, cylinder drive system Open nose for easy jam clear Optional singel shot trigger #876762

Visit Store Now !!

Detail Products

Detail Reviews

May 20, 2011 08:22:05

Hitachi N5008AC 1-Inch to 2-Inch 7/16-Inch Medium Crown 16 Gauge Stapler

Hitachi N5008AC 1-Inch to 2-Inch 7/16-Inch Medium Crown 16 Gauge Stapler Reviews

Other Picture

Hitachi N5008AC 1-Inch to 2-Inch 7/16-Inch Medium Crown 16 Gauge Stapler Feature

• Lightweight design for less operator fatigue; easy load magazine for less downtime and more productivity
• Quick-clear jam release increases user efficiency
• Depth of drive adjustment, to countersink or flush drive staples
• Includes safety glasses and 4mm hex bar wrench
• 4.4 pounds; 5-year warranty

The Hitachi N5008AC 7/16-Inch Standard Crown Stapler is a durable, lightweight, well-balanced pneumatic stapler that's ideal for construction work, such as wall sheathing, roof decking, subflooring, modular home building, wooden box construction, and expendable-pallet manufacturing. With a high-capacity magazine, dual firing methods, and adjustable depth of drive, the N5008AC Stapler can handle just about any job you throw at it.

This crown stapler's high magazine capacity and quick jam-clearing system add efficiency to contruction work. View larger.

N5008AC 7/16-Inch Standard Crown Stapler Tool Features High-capacity open magazine Quick-clear jam release Intermittent or continuous firing Adjustable depth-of-drive Lightweight, ergonomic design

Safety glasses and a hex bar wrench are included for added convenience. View larger.

High-Capacity Magazine Saves Time
The N5008AC is equipped with a high-capacity magazine that holds up to 150 staples. Not only does this magazine save time by allowing for fewer staple refills, but its open design lets you easily keep an eye on the staple level. And for increased efficiency during operation, Hitachi equipped the N5008AC with a quick-clear jam release.

The N5008AC's magazine is built using tough, lightweight plastic--it even has stainless steel plating on top for durability. The magazine accepts 16-gauge standard crown staples from one to two inches in length, although Hitachi recommends using the following sizes: 7/16 x 1-1/2 inches, 7/16 x 1-3/4 inches, and 7/16 x 2 inches.

Dual Firing Modes for Versatility
The N5008AC uses a straight firing angle that operates at 70-120 psi. There are two firing options: intermittent or continuous. Intermittent firing allows you to fire using the trigger, while the continuous firing option allows you to fire staples continuously along the workpiece using a bouncing motion.

Adjustable Depth of Drive for Precision
The N5008AC features depth of drive that is easy to adjust with the included hex bar wrench. This feature gives you the ability to countersink staples and select the right depth for the job.

Designed for Comfort and Efficiency
At just 4.4 pounds and featuring a well-balanced design, the N5008AC allows for easy one-handed operation without loss of precision. Its soft rubber grip provides extended comfort for all-day jobs, such as roof decking, subflooring, and modular home construction.

The Hitachi N5008AC Standard Crown Stapler measures 14-3/8 x 3 x 10 inches (LxWxH). It features a 1/4-inch air inlet, and it takes in air at a rate of 0.040 cubic feet/cycle at 100 psi. It is compatible with Hitachi's Sequential Trip Mechanism Kit (sold separately), which is ideal for precision fastener placement.

The N5008AC is backed by a five-year limited warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
N5008AC Stapler, safety glasses, and hex bar wrench.
For such a light gun, this one really gets the job done. It's just a bit more than 4 pounds, but it feels even lighter than that in hand because, we assume, of Hitachi's famous design and engineering. Equipped with a contact trip mechanism, it fires as fast as you can go, but you can pick up the optional sequential trigger if you need it. The magazine holds a robust 150 staples, and that means less downtime for reloading. We like the open magazine design, because you can see at just a glance if you're running low on fasteners. Not that we've ever fired blanks...

We couldn't get this gun to jam, but the clearing process is fast and simple: Just release the lock latch, open the blade guide, free the jam with a screwdriver and close the latch. Done. There's a nice clean depth-of-drive adjustment, but it isn't tool-free, so users may prefer controlling that with air pressure. It's a hardworking, trouble-free, rugged gun that will last for years.--Kris Jensen-Van Heste

Visit Store Now !!

Detail Products

• Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer
• Hitachi NT50AE2 18-Gauge 5/8-Inch to 2-Inch Brad Nailer
• B & C Eagle SDM-2 2-Inch by 16 Gauge by 7/16-Inch Medium Crown Galvanized Sheathing Staple (10,000 per Box)
• Hitachi 19413F 100-Foot-by-1/4-Inch Polyurethane Air Hose
• Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer

Detail Reviews

May 19, 2011 12:09:04

Grizzly H7943 21° Framing Nailer

Grizzly H7943 21° Framing Nailer Reviews

Other Picture

? The most powerful (1100 inch lbs.) framing nail gun in its class ? Shoots up to 10 nails per second ? Shoots 2" - 4" round head nails ? Accepts most all 21° framing nails on the market ? Depth-of-drive adjustment ? Patented automatic single shot/bump fire switch ? Dry fire lock ? 360° exhaust port adjustment ? 500,000 shots guaranteed with Grizzly nails ? Includes carry case, oil, repair piston O-rings and wrenches ? Weighs 7.75 lbs.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 11:26:06