Magnetic Washer Adaptor for ST4100 tool

Magnetic Washer Adaptor for ST4100 tool Reviews

Other Picture

Magnetic Washer Adaptor for ST4100 tool

Visit Store Now !!

Detail Products

Detail Reviews

Mar 31, 2011 17:10:06

Porter Cable 23 Gauge 1-3/8'' Pin Nailer

Porter Cable 23 Gauge 1-3/8'' Pin Nailer Reviews

Other Picture

Porter Cable 23 Gauge 1-3/8'' Pin Nailer Feature

• Aluminum body and magazine construction for durability
• Dual-stack ring system minimizes internal friction
• Removable non-marring tip eliminates wood indentations
• Weighs just 2.2 pounds
• Magazine capacity: 130 pins

The Porter-Cable maintenance-free 23GA 13/8'' Pin Nailer is finally here! Perfect for professional and serious woodworkers alike, the PIN 138 delivers serious holding power while keeping nail visibility to a minimum.Fastens materials that would normally split using larger tools.Will countersink 1-3/8" nails into hard materials like Oak.Dual-stack ring system minimizes internal friction resulting in no maintenance yet longer life.Rear exhaust directs potential moisture and contaminates away from the work surface.Narrow nose gives you improved visibility.Removable non-marring tip eliminates wood indentations.Extra non-marring tip is included and stored in the tool.Weighs just 2.2 pounds.Aluminum body and magazine construction for durability.Reversible belt clip lets you keep the tool by your side when not in use.Excellent for small trim decorative moldings, cabinet crown molding, raised panel doors, rope and bead molding, mantle building, wood joining, as well as light fastening and clamping applications.Specifications:Magazine capacity: 130 pins.Firing modes: Dual trigger feature.Operating pressure: 60-100.Fastener type: 23GA headless and slight head pin nails.Fastener range: 5/8" to 1-3/8".Height: 7-1/2".Length: 9-1/2".Weight: 2.2 lbs.

Visit Store Now !!

Detail Products

• Porter Cable PIN23063 23 Ga. X 5/8" Pin Nails (2,000 Pk)
• PINs.100 23 Ga. X 1" Pin Nails (2,000 Pk)

Detail Reviews

Mar 30, 2011 21:24:04

Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler

Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler Reviews

Other Picture

Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler Feature

• Versatile hardwood flooring tongue and groove stapler
• Includes flooring shoe and conventional nose
• Drives staples at a 45-degree angle every time
• Lightweight, easy to handle
• 1/4-inch crown 1-inch 18-gauge galvanized staples

3/8" & 1/2" Wood/Laminate Flooring; Versatile hardwood flooring tongue and groove stapler; Precise - drives staples at 45 degree angle every time; Lightweight, easy to handle; 1/4" crown 1" 18 gauge galvanized staples; Converts to a conventional underlayment stapler (nose included); Includes carrying case

Visit Store Now !!

Detail Products

• Porta-Nailer 46196 1-inch by 18 Gauge 1/4-Inch Crown Staple (5,000 per Box)
• Porta-Nail 42620 Flooring Nail/Staple Setting Tool
• Porta-Nails 46197 18 Gauge 1-1/4-Inch by 1/4-Inch Crown Flooring Staples
• B & C Eagle 9032 1-1/4-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box)
• B & C Eagle 9025 1-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box)

Detail Reviews

Mar 30, 2011 01:38:04

Hitachi NR90AEPR 3-1/2-Inch Full-Head Framing Strip Nailer

Hitachi NR90AEPR 3-1/2-Inch Full-Head Framing Strip Nailer Reviews

Other Picture

Hitachi NR90AEPR 3-1/2-Inch Full-Head Framing Strip Nailer Feature

• Round-head 2- to 3-1/2-inch framing nailer with selective actuation switch (sequential or bump) for convenience
• 70-120 psi operating pressure; simple tool-free depth adjustment; vibration isolation pads mounted on nose
• 2-piece anodized aluminum magazine, comfortable non-slip rubber grip
• Comes with safety glasses
• Lightweight and well-balanced at 7.5-pounds; 5-year warranty

The Hitachi Framing Nailer drives paper collated nails from 2in. up to 3 1/2in. long. At only 7.5 lbs., the NR90AEPR is easy to use all day while still providing the power of heavier, bulkier nailers. This nailer can be used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction. Air Consumption (CFM): .09 @ 100 PSI, Operating PSI: 70 - 120, Fasteners Used: Round head plastic collation, Fastener Sizes (in.): 2 - 3 1/2, Fastener Size (gauge): .113 - .148, Fastener Capacity Per Strip: 64 @ .131, Adjustable Depth Control: Yes (tool-less), Coil or Strip: Strip, Case Included: No, Tool Length (in.): 20.8, Tool Weight (lbs.): 7.5

Visit Store Now !!

Detail Products

• B & C Eagle A312X131/22 Round Head 3-1/2-Inch by .131-Inch by 20 to 22 Degree Plastic Collated Framing Nail (500 per Box)
• B & C Eagle A238X113/22 Round Head 2-3/8-Inch-by-.113-Inch-by-20 to 22-Degree Plastic Collated Framing Nail (500 per Box)
• GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends
• Bucket Boss 06048 GateMouth Gunner Bag
• Hitachi NT50AE2 18-Gauge 5/8-Inch to 2-Inch Brad Nailer

Detail Reviews

Mar 28, 2011 12:04:08

Pneumatic Ball Joint Separator

Pneumatic Ball Joint Separator Reviews

Other Picture

950019 Features: -Pneumatic Ball Joint Separator.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 27, 2011 14:46:06

Freeman PFN1564 15 Gauge 34 Degree 2-1/2-Inch Angled Finish Nailer

Freeman PFN1564 15 Gauge 34 Degree 2-1/2-Inch Angled Finish Nailer Reviews

Other Picture

Freeman PFN1564 15 Gauge 34 Degree 2-1/2-Inch Angled Finish Nailer Feature

• Anodized aluminum and oilless parts for extended wear
• Durable plastic carrying case
• Open nose design
• Easy depth adjust
• 7 year limited warranty

Top off your projects with Freemans 2-1/2-inch 15-gauge Angled Finish Nailer! Use it to install moldings, chair rails, cabinetry and other fine finish applications. It features a tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use. A simple flip of the selective actuation switch allows for either sequential or contact fastening, depending on the application, with no additional parts or tools required. The finger depth adjusts for flush fastening into varying material for improved control and a professional finish. The 34-degree angle of the magazine allows the user to reach into corners or tight spaces with ease. Fastener Length Range: 1-1/4" to 2-1/2" Dimensions: 14.5" x 3.25" x 10.5" Tool Weight: 4.5 lbs Shipping Weight: 8.5 lbs The Freeman 15 Gauge 34 degrees Angle Finish Nailer includes reversible belt hook, oil, goggles, and wrenches.

Visit Store Now !!

Detail Products

• Senco A302000 15-Gauge by 2-Inch Bright Basic Finish Nail
• Senco A302500 15-Gauge x 2-1/2 Inch Bright Basic Finish Nail
• Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer
• Bostitch FLN-200 2-Inch Flooring L-Nail, 1000-Per Box
• Porta-Nail 42620 Flooring Nail/Staple Setting Tool

Detail Reviews

Mar 25, 2011 21:35:05

Grip-Rite GR200FS Flooring Stapler

Grip-Rite GR200FS Flooring Stapler Reviews

Other Picture

Grip-Rite GR200FS Flooring Stapler Feature

• Pneumatic, single strike design
• Fast, easy loading
• Installs 1/2 to 33/32 inch (1.27 to 2.62 cm) tongue and groove flooring
• Mallet actuated to give you the tightest floors
• Precise - drives at 45 Degrees angle every time

GR200FS This is the ideal pneumatic hardwood flooring stapler for the professional installer looking for high speed and high volume fastening. The GR200FS is precision-built, and its mallet actuated ''single-strike'' design offers the ease and efficiency of installing the tightest floor joints possible. It features an aluminum body for jobsite durability and lightweight handling. Hand built to the highest standards, the GR200FS comes with a 12-month warranty and is the pneumatic flooring stapler of choice for the flooring professional, or anyone else interested in doing quality work with a quality piece of equipment. Features: -Pneumatic, single-strike design -Fast, easy-loading -Installs 1/2'' to 33/32'' tongue and groove flooring -Mallet actuated to give you the tightest possible floors -Precise- drives at 45 degree angle every time -Lightweight die cast aluminum body offers jobsite durability and easy handling -Ready to work- comes complete with mallet, lubricating oil, 1/2'' adaptor pad and bumper, wrenches, and O-ring kit -12 month limited warranty Specifications: -Firing mode: mallet actuated -Magazine capacity: 92 -Operating pressure PSI: 70-120 -Fastener type: 15 to 15-1/2 GA floor staples 1/2'' crown -Fastener range: 1-1/2'' to 2'' -Collation: adhesive -Weight: 9 pounds -Dimensions: 18.8'' H x 18'' L x 3.1'' W Specification Sheet: GRF200FS

Visit Store Now !!

Detail Products

Detail Reviews

Mar 24, 2011 18:46:03

New 3 in 1 Hardwood Floor,flooring Cleat Nailer and Stapler 1/2" -3/4" Floor

New 3 in 1 Hardwood Floor,flooring Cleat Nailer and Stapler 1/2" -3/4" Floor Reviews

Other Picture

New 3 in 1 Hardwood Floor,flooring Cleat Nailer and Stapler 1/2" -3/4" Floor Feature

• Uses Staples, L-Cleat Nails and T-Nails
• Install hardwood floors without any Hammer Marks

Uses Staples, L-Cleat Nails and T-Nails Install hardwood floors without any hammer marks! Use cleat nails 1-1/2" to 2" long Magazine capacity of 100 staples and 120 nails, top loading magazine with push out cover Maximum air operating pressure: 100 PSI Air inlet: 1/4" - 18 NPT Includes coupler plug, top handle, slugging hammer, three hex wrenches, air tool oil, and cleat nail conversion Flooring capacity: 1/2" and 25/32" Overall dimensions: 20-1/2" L x 3-1/2" W x 22-5/8" H

Visit Store Now !!

Detail Products

• Porta-Nail 42620 Flooring Nail/Staple Setting Tool
• Bostitch FLN-200 2-Inch Flooring L-Nail, 1000-Per Box

Detail Reviews

Mar 23, 2011 23:25:03

12 Hitachi Fuel Cells NR90GR-NR90GC Gas Framing Nailer

12 Hitachi Fuel Cells NR90GR-NR90GC Gas Framing Nailer Reviews

Other Picture

Hitachi fuel rods for powering the new Hitachi cordless nailers. This item comes packed 12 per case and 1,200 nails can be fired per fuel cell

Visit Store Now !!

Detail Products

Detail Reviews

Mar 23, 2011 04:24:07

Grip-Rite GR250 Multi Blow Joist Nailer, 2-1/2-Inch

Grip-Rite GR250 Multi Blow Joist Nailer, 2-1/2-Inch Reviews

Other Picture

Grip-Rite GR250 Multi Blow Joist Nailer, 2-1/2-Inch Feature

• Multi-blow functionality promotes safer usage, compared to single-blow tools
• Shoots both paper and plastic collated joist nails
• Designed to use either standard or tip hardened nails
• Small, lightweight and compact only 4.8 pounds
• Robust design with easy maintenance

Grip-Rite hand drive and collated fasteners are known for their toughness and reliablility. The Grip-Rite pneumatic joist hanger nailer offers those very same qualities that you depend on, day after day. The compact nailer shoots a 2 1/2 nail and is designed to work easily in tight, confined spaces. The GR250 features multi-blow functionality, which promotes safer usage when compared to single-blow tools.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 21, 2011 14:43:06

Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement Tip

Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement Tip Reviews

Other Picture

Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement Tip Feature

• Tool converts to metal connector nailer in seconds with included tip
• Lightweight Magnesium housing weighs just 8.1 lbs
• More power: 1050 inch lbs for engineered lumber
• Tool free adjustable exhaust
• Patented push-button depth of drive

The Bostitch F21PL Factory Reconditioned 2Inch - 3-1/2Inch Industrial Stick Framing Nailer, 80 - 120 PSI, 21° is made of magnesium alloy that makes the tool durable. This factory reconditioned framing nailer comes with two nosepieces that let you to easily change the tool from framing connector to metal connector application. Besides, this bostitch framing nailer has a push button that lets you adjust the depth to which the nails need to be set. The smart trigger of the nail framing gun lets you choose the firing mode. The adjustable belt hook allows this bostitch framing nailer to be hung from the roof and thus adds to the convenience. The F21PL can also drive the plastic collated 1-1/2" and 2-1/2" metal connector nails. Moreover, the hardened steel wear guards and the skid resistant rubber pads make this tool user friendly.   Features: Aggressive teeth for toe nailing Steel guards with anti-skid rubber inserts More power for engineered lumber New Smart Trigger Patented push button adjustable depth guide sets nails to desired depths Lightweight magnesium design for added durability Drives plastic collated 1-1/2" and 2-1/2" metal connector nails (.131" - .148" diameter) What's In the Box: Nailer (2) quick change nosepieces to convert tool to either framing or metal connector applications Factory installed sequential trigger and exclusive Smart Trigger

Visit Store Now !!

Detail Products

• Factory-Reconditioned Bostitch U/CPACK300 3-Tool and Compressor Combo Kit
• GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends
• Factory-Reconditioned Bostitch U/RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer
• B & C Eagle A312X131/22 Round Head 3-1/2-Inch by .131-Inch by 20 to 22 Degree Plastic Collated Framing Nail (500 per Box)
• B & C Eagle A238X113/22 Round Head 2-3/8-Inch-by-.113-Inch-by-20 to 22-Degree Plastic Collated Framing Nail (500 per Box)

Detail Reviews

Mar 20, 2011 14:41:07

HIGH GRADE Cadex 23 gauge pins pin nails, 1-3/8" (35MM) - 4000 PK

HIGH GRADE Cadex 23 gauge pins pin nails, 1-3/8" (35MM) - 4000 PK Reviews

Other Picture

HIGH GRADE Cadex 23 gauge pins pin nails, 1-3/8" (35MM) - 4000 PK Feature

• 1-3/8" (35MM) 23 Gauge pins, 4000 pk
• Rounded edges of pin result in less deflection than cheaper brands (pls. read description below).
• Well made product from Cadex, manufactuer of high grade finish nailers
• Fits all 23 gauge pinners rated for this length.

Cadex 23 gauge pins are considered the highest quality available, developed by the same company that markets the highly rated Cadex and Nikle 23 gauge tools. The slightly rounded edges result in less pin deflection in the wood than the cheaper square pins. If you are using 23 gauge in the first place, you are likely working on fine finishing or furniture. Yes, you can buy cheaper pins, but at a fraction of a penny a pin, why compromise on your project?

Cadex headless pins will fit all 23 gauge pinners including Cadex, Nikle, Bostitch, Senco, Porter Cable, Spot Nail, and others (within rated size specification of course).

Visit Store Now !!

Detail Products

• HIGH GRADE Cadex 23 gauge pins pin nails, 1" (25MM) - 4000 PK
• HIGH GRADE Cadex 23 gauge pins pin nails, 2" (50MM) - 4000 PK
• CADEX 23 Gauge Slight Headed Brad Nails, 1-3/8" x 4000 pk
• CADEX 23 Gauge Slight Headed Brad Nails, 11/16" x 4000 pk
• HIGH GRADE Cadex 23 gauge pins pin nails, 11/16" (18MM) - 4000 PK

Detail Reviews

Mar 19, 2011 16:11:12

Bostitch CPACKN80 Framing Nailer & Compressor Combo Kit

Bostitch CPACKN80 Framing Nailer & Compressor Combo Kit Reviews

Other Picture

Bostitch CPACKN80 Framing Nailer & Compressor Combo Kit Feature

• 2.5HP/6GAL Oil-Lube Compressor
• N80SB-1 - Stick Framing Nailer
• Includes: Hose, All Fittings & Tape
• Compressor has: soft-start induction motor & Cast iron sleeves

Here's a tough-as-nails nailer and a hardworking compressor perfect for the professional carpenter. The framing nailer has a 75-nail capacity extruded aluminum magazine that Bostitch says will survive falls, though we didn't try that for ourselves. We can tell you, though, that even though it weighs 8 pounds, it balances well and doesn't strain the user. Depth adjusts easily, and hungry toe-nailing teeth really take hold for slip-free use. It reliably fires 2- to 3-1/2-inch clipped head nails for use in framing, sheathing, siding, fencing, trusses, decking, pallets and wood to masonry. Powering this nailer is a 2.5 horse, six-gallon oil-lube compressor. At six gallons, it's not huge, but for nailers, this is plenty. We like that it's ready to use right out of the box, with all the air line and accessories you need to get started. Maintenance is important: You'll need to open the drain valves a couple times a day and oil it in the morning and at noon, and it'll serve you well.--Kris Jensen-Van Heste

Visit Store Now !!

Detail Products

Detail Reviews

Mar 18, 2011 17:30:34